Icom IC-2820H Instruction Manual - Page 61
When calling the desired station, When sending a CQ
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5 DV MODE OPERATION (Optional UT-123 is required) D When calling the desired station Continued instruction from step v on page 39. bRotate [DIAL] to select "YOUR," then push [MAIN•BAND]. • YOUR CALL SIGN screen is displayed. nRotate [DIAL] to select the call sign channel in which de- sired station's call sign is programmed. • See page 38 for station call sign programming details. m Push [BACK](V/MHz•SCAN) (Right band's) to set the station's call sign and return to CALL SIGN screen. , Push [BACK](V/MHz•SCAN) (Right band's) again to return to function guide 2 indication. . Perform the instruction steps t to y on page 39. D When sending a CQ Continued instruction from step v on page 39. b Push [CQ](DUP•MONI) to set "CQCQCQ" as the call sign. nPush [BACK](V/MHz•SCAN) (Right band's) to return to function guide 2 indication. m Perform the instruction step t to y on page 39. 1 ✔ For your information! Your own (MY) call sign, Station call sign and repeater call 2 sign can also be programmed/edited in "CALL SIGN" screen. 3 In addition, when editing a call sign stored in a call sign mem- 4 ory, regular memory or call channel, the default operation is to over-write a programmed call sign in regular memory and call 5 channels. (Temporary operation without over-writing is possible.) 6 However, the edited call sign can store into a blank channel automatically when "AUTO" is set with the EDIT RECORD 7 (p. 104). 8 zWhile displaying "CALL SIGN" screen, rotate [DIAL] to select 9 either "YOUR," "RPT1/2" or "MY" then push [MAIN•BAND]. xRotate [DIAL] to select the desired call sign memory chan- 10 nel then push [MAIN•BAND]. cRotate [DIAL] to select the desired call sign memory chan- 11 nel then push [MAIN•BAND]. 12 vRotate [DIAL] to select the desired character. • Push [ABC](TONE•DTMF) to select the character group from 13 capital letter characters. 14 • Push [12/](M/CALL•MW) (Right band's) to select the character group from numbers or symbol. 15 • Push [>](M/CALL•MW) (Left band's) or [