Icom IC-2820H Instruction Manual - Page 43
Squelch attenuator
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
BASIC OPERATION 3 ■ Squelch attenuator The transceiver has an RF attenuator related to the squelch level setting. Approx. 10 dB attenuation is obtained at maximum setting. The squelch attenuator allows you to set the minimum signal level needed to open the squelch. The attenuator function can be deactivated in set mode. ➥ Rotate [SQL] clockwise past the 13 o'clock position to activate the squelch attenuator. • Attenuation level can be adjusted up to 10 dB (approx.) between 13 o'clock and fully clockwise position. Noise squelch Squelch threshold Squelch is open. Squelch attenuator Shallow Deep NOTE: The squelch attenuator functions even when the monitor function is in use. Thus it is recommended to set the [SQL] control between the 10 and 13 o'clock positions when using the monitor function. 1 D Squelch attenuator setting 2 q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU 3 screen. 4 5 [F• ] 6 [MENU] 7 eRotate [DIAL] to select "SET MODE," then push 8 [MAIN•BAND] to enter set mode. rRotate [DIAL] to select "AUTO ATT" then push 9 [MAIN•BAND]. tRotate [DIAL] to turn the squelch attenuator function ON 10 and OFF, then push [MAIN•BAND] 11 • Select "OFF" to deactivate the squelch attenuator function. 12 13 14 15 y Push [BACK](V/MHz•SCAN) (Right band's) twice to return to 16 frequency indication. 17 18 19 22