Icom IC-2820H Instruction Manual - Page 47
One-touch PTT function
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
BASIC OPERATION 3 When diversity operation is in use, connect the same type antenna to both [ANT1] and [ANT2 RX]. ➥ During single band operation with the diversity function ON, the diversity indicator appears as below. Diversity indicator appears. While [ANT2 RX] is selected; While [ANT1 TX/RX] is selected; When a frequency band that the diversity reception is inhibited is selected. With the squelch open in FM mode while receiving a weak signal, diversity receiving does not work properly. ■ One-touch PTT function 1 The PTT switch can be operated as a one-touch PTT switch 2 (each push toggles between transmit/receive). Using this function you can transmit without pushing and holding the 3 PTT switch. 4 To prevent accidental, continuous transmissions with this 5 function, the transceiver has a time-out timer. See p. 101 for 6 details. 7 z Push [FUNC] then [PRIO 3(PTT-M)] to turn the PTT-M one-touch PTT function ON. 8 • The activity indicator lights green. 9 x Push [PTT] to transmit and push again to receive. 10 • A beep sounds when transmission is started and a 11 long beep sounds when returning to receive. c Push [FUNC] then [PRIO 3(PTT-M)] to turn the 12 one-touch PTT function OFF. 13 • The activity indicator goes out. 14 15 16 17 18 19 26