Icom IC-2820H Instruction Manual - Page 64
Repeater operation in the same zone
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
5 DV MODE OPERATION (Optional UT-123 is required) D Repeater operation in the same zone qSet the desired repeater's frequency, offset and shift direction in the main band. (pgs. 30, 31) • Select DV mode in advance. (p. 21) w Set your own call sign. (p. 39) • See p. 37 for your own call sign programming. e Set the desired station call sign. (p. 40) • See p. 38 for station call sign programming. r Set the repeater's call sign as follows; z Push [F• ] twice to display the function guide 2. xPush [CS](V/MHz) (Left band's) to display the "CALL SIGN" screen. cRotate [DIAL] to select "RPT1," then push [MAIN•BAND]. • RPT1 CALL SIGN screen is displayed. vRotate [DIAL] to select the nearest repeater's call sign then push [BACK](V/MHz) (Right band's). mPush [BACK](V/MHz•SCAN) (Right band's) to exit "CALL SIGN" screen. t Push [PTT] to transmit; release to receive. bRotate [DIAL] to select "RPT2" then push [MAIN•BAND]. • RPT2 CALL SIGN screen is displayed. nRotate [DIAL] to select the desired repeater's (in the same zone) call sign. • Select "NOT USE✱" when not operating RPT2. 43