Icom IC-2820H Instruction Manual - Page 56
Auto repeater
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 REPEATER OPERATION ■ Auto repeater The USA and Korean versions automatically use standard repeater settings (duplex ON/OFF, duplex direction, tone encoder ON/OFF) when the operating frequency falls within or outside of the general repeater output frequency range. The offset and repeater tone frequencies are not changed by the auto repeater function. Reset these frequencies, if necessary. D Frequency range and offset direction • USA version FREQUENCY RANGE SHIFT DIRECTION 145.200-145.495 MHz 146.610-146.995 MHz "DUP-" appears 147.000-147.395 MHz "DUP+" appears 442.000-444.995 MHz "DUP+" appears 447.000-449.995 MHz "DUP-" appears • Korean version FREQUENCY RANGE 439.000-440.000 MHz SHIFT DIRECTION "DUP-" appears USA/KOREAN versions only q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. e Rotate [DIAL] to select "SET MODE" then push [MAIN•BAND]. rRotate [DIAL] to select "AUTO REPEATER" then push [MAIN•BAND]. t Rotate [DIAL] to select the auto repeater setting. [USA version]: • "RPT1" : Activates duplex only. (default) • "RPT2" : Activates duplex and tone. • "OFF" : Auto repeater function is turned OFF. [Korean version]: • "ON" : Activates duplex and tone. (default) • "OFF" : Auto repeater function is turned OFF. y Push [BACK](V/MHz•SCAN) (Right band's) twice to exit from set mode. Auto Repeater set: ON1 (USA version) 35