Icom IC-2820H Instruction Manual - Page 138
Data cloning - programming software
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
15 OTHER FUNCTIONS ■ Data cloning AT POWER ON Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another; or, data from a personal computer to a transceiver using the optional CS-2820 CLONING SOFTWARE. D Cloning between transceivers qConnect the optional OPC-474 cloning cable to the [SP-2] jack of the master and sub-transceivers. • The master transceiver is used to send data to the sub-transceiver. To [SP-2] To [SP-2] wWhile pushing right band's [M/CALL•MW], turn power ON to enter cloning mode (master transceiver only- power on only for sub-transceiver). • "CLONE" and "M" appear and the transceivers enter the clone standby condition. While pushing right band's [M/CALL•MW], turn power ON. ePush [M/CALL•MW] (Right band's) on the master trans- ceiver. • "CLONE OUT" appears in the master transceiver's display and the bar meter shows that data is being transferred to the subtransceiver. • "CLONE IN" appears automatically in the sub-transceiver's display and the bar meter shows that data is being received from the master transceiver. Optional OPC-474 Pushing right band's [M/CALL•MW] start cloning. rWhen cloning is finished, turn power OFF, then ON to exit cloning mode. 117