Icom IC-2820H Instruction Manual - Page 125
Repeater call sign auto write, DV auto detect, Call sign edit record, EMR communication, Break-in
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
MENU SCREEN OPERATION 14 D Repeater call sign auto write When accessing a repeater with a call sign that is different than the one programmed in your radio, the repeater call sign can be set into "RPT1" and or "RPT2" automatically by read- ing the repeater's transmission. (default: OFF) The transceiver sets the received repeater call sign for operation. Therefore, when a different call sign is set for operation, the previously set repeater call sign will be lost. D DV auto detect When a signal other than DV mode is received during DV mode operation, the transceiver has the capability of auto- matic FM mode selection. • OFF : Operating mode is fixed in DV. (default) • ON : The transceiver automatically selects FM mode for temporary operation. 1 D Call sign edit record 2 Selects the call sign programming when the call sign is edited 3 or corrected with the pre-programmed call sign via call sign set screen. 4 • SELECT : The edited or corrected call sign is pro- 5 grammed (over written) into the selected call sign memory. 6 • AUTO : The edited or corrected call sign is pro- 7 grammed into a blank channel automatically. (default) 8 9 D EMR communication 10 Turns the EMR communication mode ON and OFF (default). 11 D Break-in communication 14 Turns the break-in communication mode ON and OFF (de- 13 fault). 14 15 16 17 18 19 104