Icom IC-2820H Instruction Manual - Page 31
Antenna Connector [ant2 Rx], External Speaker Jack 1 [sp-1], External Speaker Jack 2 [sp-2], Power
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
PANEL DESCRIPTION 1 1 i ANTENNA CONNECTOR [ANT2 RX] (p. IX) Connects a 50 Ω antenna with a PL-259 connector and a 50 Ω coaxial cable for diversity reception. o EXTERNAL SPEAKER JACK 1 [SP-1] Connects an 8 Ω speaker. Outputs audio from both left and right bands when no external speaker is connected to [SP2]. See the table at right for details. • Audio output power is more than 2.4 W. ANTENNA INFORMATION 2 For radio communications, the antenna is of critical impor- 3 tance, to maximize your output power and receiver sensitivity. The transceiver accepts a 50 Ω antenna and a 4 Voltage Standing Wave Ratio (VSWR) of 1.5:1 or less. High 5 SWR values not only may damage the transceiver but also lead to TVI or BCI problems. 6 7 !0 EXTERNAL SPEAKER JACK 2 [SP-2] • Speaker information 8 Connects an 8 Ω speaker. Outputs right band's audio only. • Audio output power is more than 2.4 W. Connected speaker Left band audio Right band audio 9 !1 POWER RECEPTACLE [DC13.8V] Accepts 13.8 V DC ±15% with the supplied DC power No external speakers [SP-1] only Internal speaker (mixed audio) External speaker (mixed audio) 10 11 cable. [SP-2] only Internal speaker External speaker 12 NOTE: DO NOT use a cigarette lighter socket as a power source when operating in a vehicle. The plug may cause voltage drops and ignition noise may be su- 2 external External speaker via External speaker via 13 speakers [SP-1] [SP-2] 14 perimposed onto transmit or receive audio. 15 16 17 18 19 10