Icom IC-2820H Instruction Manual - Page 156
Optional UT-123 installation
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
17 MAINTENANCE ■ Optional UT-123 installation IMPORTANT! Turn power OFF and disconnect the transceiver from power source before opening the top cover. Otherwise an electric shock or damage to the transceiver may occur. Install the optional UT-123 as following procedures. q Unscrew 10 screws from the top cover of the main unit then remove the top cover. w Insert the UT-123 into the connector on the main unit as illustrated as below, then confirm to install it completely. e Replace the top cover and screws to the original position. 135
135
17
MAINTENANCE
■
Optional UT-123 installation
Install the optional UT-123 as following procedures.
q
Unscrew 10 screws from the top cover of the main unit
then remove the top cover.
w
Insert the UT-123 into the connector on the main unit as il-
lustrated as below, then con
fi
rm to install it completely.
e
Replace the top cover and screws to the original position.
IMPORTANT!
Turn power OFF and disconnect the transceiver from
power source before opening the top cover. Otherwise an
electric shock or damage to the transceiver may occur.