Icom IC-2820H Instruction Manual - Page 33
Microphone keypad
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
PANEL DESCRIPTION 1 ■ Microphone keypad 1 KEY FUNCTION SECONDARY FUNCTION ( +key) OTHER FUNCTIONS 2 Switches between opening and closing the In VFO mode enters operating band selec- 3 squelch. (p. 24) tion. 4 In memory mode enters bank selection. 5 (p. 64) Starts and stops scanning. (p. 75) Starts and stops tone scanning. (p. 90) 6 7 Starts and stops priority watch. (p. 81) Turns the one-touch PTT function ON and OFF. (p. 26) 8 Selects high output power. (p. 21) Turns the DTCS squelch ON. After pushing : (p. 86) Transmits the appropriate 9 DTMF code. (pgs. 33, 84) 10 Selects mid. output power. (p. 21) Turns the DTCS pocket beep function ON. When the DTMF memory en- 11 (p. 86) coder is activated, push [0] to Selects low output power. (p. 21) Turns the DTMF memory encoder function [9] to transmit the appropriate 12 ON. (p. 83) DTMF memory contents . 13 Selects minus duplex operation. (p. 31) Turns the subaudible tone encoder ON. (p. 31) (p. 84) 14 Selects plus duplex operation. (p. 31) Turns the CTCSS pocket beep function 15 ON. (p. 86) 16 Selects simplex operation. (p. 31) Turns the tone squelch function ON. 17 (p. 86) Increases audio output level. (p. 20) Sends a 1750 Hz tone signal while pushing 18 and holding. (p. 33) 19 12