Icom IC-2820H Instruction Manual - Page 146
Gps/gps-a Operation
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
16 GPS/GPS-A OPERATION ■ GPS operation A GPS receiver is built-in to the optional UT-123. When UT123 is installed, GPS operation that indicate the current position (Latitude and Longitude) and time is available. The position data can also be transmitted with a message to another station. D GPS function qWhile in DV mode operation, push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. to [GPS ANT] GPS antenna [F• ] [MENU] eRotate [DIAL] to select "SET MODE," then push [MAIN•BAND] to enter set mode. rRotate [DIAL] to select "GPS" then push [MAIN•BAND]. tRotate [DIAL] to turn the GPS function ON and OFF, then push [MAIN•BAND] • Select "OFF" to deactivate the GPS function. GPS antenna cable length: approx. 5 m (16.4 ft) 125