Icom IC-2820H Instruction Manual - Page 39
Tuning step selection
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
SETTING A FREQUENCY 2 ■ Tuning step selection Tuning steps are the minimum frequency change increments when you rotate [DIAL] or push [Y]/[Z] on the microphone. Independent tuning steps for the left and right bands, as well as each frequency band can be set for individual tuning convenience. The following tuning steps are available. • 5 kHz* • 15 kHz* • 50 kHz • 6.25 kHz* • 10 kHz • 20 kHz • 25 kHz • 12.5 kHz • 30 kHz *Not selectable in 900 MHz band. NOTE: For convenience, select a tuning step that matches the frequency intervals of repeaters in your area. q Push the desired band's [MAIN•BAND] to select the main band. • Push the same band's [V/MHz•SCAN] to select VFO mode, if necessary. w Push [F• ] to display the function guide. [F• ] [TS] 1 ePush [TS](M/CALL•MW) (Left band's) to enter tuning step 2 set mode. 3 4 5 6 7 rRotate the same band's [DIAL] to select the desired tuning step. 8 tPush [F• ] to exit tuning step set mode. 9 10 11 12 13 14 15 16 17 18 19 18