Icom IC-2820H Instruction Manual - Page 18
Selecting the operating frequency band, Tune the frequency
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
QUICK REFERENCE GUIDE 3. Selecting the operating frequency band The IC-2820H can use 2 m or 70 cm on either the left or right band. The operating band can be exchanged between them, and using the same bands, V/V and U/U, is also possible.. 4. Tune the frequency The tuning dial will allow you to dial in the frequency you want to use. Pages 17 and 18 will instruct you on how to set the tuning speed. [MAIN•BAND] [DIAL] Frequency band initial is displayed. ➥ Push and hold the desired band's (left or right) [MAIN•BAND] for 1 sec. then rotate the appropriate band's [DIAL]. • Push [MAIN•BAND] momentarily to return to frequency indica- tion. Rotate the desired [DIAL]. Using the HM-133 You can directly enter the frequency with the HM-133 keypad for the main band. [EXAMPLE]: Setting frequency to 145.3625 MHz. Push Push Push Push XI