Icom IC-2820H Instruction Manual - Page 51
Accessing a repeater
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
REPEATER OPERATION 4 ■ Accessing a repeater qSet the receive frequency (repeater output frequency) on the main band. (pgs. 15-17) wPush [DUP•MONI] one or two times, to select minus duplex or plus duplex. • "DUP-" or "DUP+" appears to indicate the transmit frequency for minus shift or plus shift, respectively. • When the auto repeater function is turned ON (available for the USA version only), steps w and e are not necessary. (p. 35) "DUP-" or "DUP+" appears [DUP•MONI] ePush [TONE•DTMF] several times to turn ON the subaudi- ble tone encoder, according to repeater requirements. • "TONE" appears • 88.5 Hz is set as the default; refer to p. 32 for tone frequency set- tings. • When the repeater requires a different tone system, see p. 33. "TONE" appears [TONE•DTMF] 1 r Push and hold [PTT] to transmit. 2 • The displayed frequency automatically changes to the transmit frequency (repeater input frequency). 3 • If "OFF" appears, confirm that the offset frequency (p. 34) is set 4 correctly. t Release [PTT] to receive. 5 6 7 8 While receiving While transmitting 9 yPush [DUP•MONI] to check whether the other station's 10 transmit signal can be received directly. uTo return to simplex operation, push [DUP•MONI] once or 11 twice, to clear the "DUP-" or "DUP+" indicator. 12 iTo turn OFF the subaudible tone encoder, push [TONE•DTMF] several times until no tone indicators ap- 13 pear. 14 15 16 17 18 19 30