Icom IC-2820H Instruction Manual - Page 77
EMR communication
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
5 DV MODE OPERATION (Optional UT-123 is required) D Play-back or erase the voice memory q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to display the "MENU" screen. eRotate [DIAL] to select "DV VOICE MEMO," then push [MAIN•BAND]. rRotate [DIAL] to select "REPLY VOICE," then push [MAIN•BAND]. tTo play-back the recorded reply voice, push [≈](LOW•PRIO). • Push [||](LOW•PRIO) to pause, push [■](TONE•DUP) to cancel the play-back. yTo erase the reply voice, push [CLR](DUP•MONI). uPush [BACK](V/MHz•SCAN) (Right band's) three times to exit from DV VOICE MEMO screen. ■ EMR communication 1 The EMR communication mode is available for digital mode 2 operation. In the EMR communication mode, no call sign setting is necessary. When an EMR communication mode sig- 3 nal is received, the audio (voice) will be heard at the specified 4 level even the volume setting level is set to minimum level, or digital call sign/digital code squelch is in use. 5 qSet the desired frequency in 144 or 440 MHz band. 6 w Push [F• ] to display the function guide. 7 e Push [MENU](V/MHz•SCAN) (Right band's) to display the "MENU" screen. 8 rRotate [DIAL] to select "DV SET MODE," then push 9 [MAIN•BAND]. t Rotate [DIAL] to select "EMR," then push [MAIN•BAND]. 10 y Rotate [DIAL] to select "ON," then push [MAIN•BAND]. 11 uPush [BACK](V/MHz•SCAN) (Right band's) twice to exit from DV set mode. 12 • "EMR" appears 13 14 15 16 17 i Operate the transceiver normally. oTo cancel the EMR communication mode, select "OFF" in 18 EMR at step y. 19 56