Icom IC-2820H Instruction Manual - Page 144
Weather channel operation
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
15 OTHER FUNCTIONS ■ Weather channel operation D Weather channel selection [M/CALL•MW] [DIAL] Weather channel group indicaiton qPush the desired band's [M/CALL•MW] several times to select weather channel group. wRotate the same band's [DIAL] to select the desired weather channel. ePush the [M/CALL•MW] to select memory mode, or push the same band's [V/MHz•SCAN] to select VFO mode. D Weather alert function NOAA broadcast stations transmit weather alert tones before important weather announcements. When the weather alert function is turned ON, the selected weather channel is monitored every 5 sec. so you can hear weather announcements. When the alert signal is detected, the "ALT" and the "WX" with channel number are displayed alternately and sounds a beep tone until the transceiver is operated. The previously selected (used) weather channel is checked periodically during standby or while scanning. 123 USA version only q Select the desired weather channel. wTurn the weather alert function ON in DUP/TONE set mode. z Push [F• ] to display function guide. x Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. c Rotate [DIAL] to select "DUP/TONE..." then push [MAIN•BAND]. v Rotate [DIAL] to select "WX ALERT" then push [MAIN•BAND]. v Rotate [DIAL] to select "ON" then push [MAIN•BAND]. b Push [BACK](V/MHz•SCAN) (Right band's) twice to exit from DUP/TONE set mode. e Sets the desired stand-by condition. • Selects VFO, memory or call channel. • Scan or priority watch operation can also be selected. rWhen the alert is detected, a beep sounds and the following indication will be displayed. The display shows above indications alternately. tTurn the weather alert function OFF in DUP/TONE set mode.