Icom IC-2820H Instruction Manual - Page 76
Automatic reply function
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5 DV MODE OPERATION (Optional UT-123 is required) ■ Automatic reply function The automatic reply function replies to calls by a station that specified your call sign. Two methods of replying are available: one is making a reply call with your own call sign, and other one is making a reply call with reply voice audio that has been recorded in DV voice memory. D Automatic reply function setting q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to display the "MENU" screen. eRotate [DIAL] to select "DV SET MODE," then push [MAIN•BAND]. rRotate [DIAL] to select "AUTO REPLY," then push [MAIN•BAND]. t Rotate [DIAL] to select the desired reply condition. OFF : Deactivate the automatic reply function. (default) ON : Reply to the call with your own call sign. VOICE : Reply to the call with the recorded voice memory. y Push [BACK](V/MHz•SCAN) (Right band's) three times to return to frequency indication. 55 D Voice memory recording for automatic reply IMPORTANT! Set the transceiver for single band operation and/or set minimum [VOL] level for sub band when recording the reply voice. Otherwise received audio or unwanted noise from sub band is also recorded into the voice memory. q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to display the "MENU" screen. eRotate [DIAL] to select "DV VOICE MEMO," then push [MAIN•BAND]. rRotate [DIAL] to select "REPLY VOICE," then push [MAIN•BAND]. • Bar meter is displayed when the reply voice has already been recorded. tWhile pushing and holding [PTT], speak into the microphone. • Up to 10 seconds of message is recordable. • The recording stops after 10 second or when [PTT] is released. y Push [BACK](V/MHz•SCAN) (Right band's) three times to exit from DV VOICE MEMO screen.