Icom IC-2820H Instruction Manual - Page 99
Scan resume condition
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
■ Scan resume condition The scan resume condition can be selected as timer or pause scan. The selected resume condition is also used for priority watch. (p. 81) The display shows that the scan will resume 15 sec. after it stops. q Push [MAIN•BAND] to select the desired band (left or right) as the main band. w Push [F• ] to display the function guide. e Push [MENU](V/MHz•SCAN] (Right band's) to enter MENU screen. rRotate the [DIAL] to select "SCAN," then push [MAIN•BAND]. tRotate the main band's [DIAL] to select "SCAN TIMER," then push [MAIN•BAND]. y Rotate [DIAL] to select the desired timer: • "T-5" : Scan pauses 5 sec. while receiving a signal. • "T-10" : Scan pauses 10 sec. while receiving a signal. • "T-15" : Scan pauses 15 sec. while receiving a signal. • "P-2" : Scan pauses until the signal disappears and then re- sumes 2 sec. later. u Push [MAIN•BAND] to set. i Push [BACK](V/MHz•SCAN) (Right band's) twice to return to frequency indication. SCAN OPERATION 8 1 z Push [BAND] to select the desired band (left or 2 SET right) as the main band. B x Push [SET B(D-OFF)] to enter MENU screen. 3 c Push [Y] or [Z] to select "SCAN" then push 4 [SET B(D-OFF)] to enter scan set mode. 5 v Push [Y] or [Z] to select "SCAN TIMER" then push [SET B(D-OFF)]. 6 b Push [Y] or [Z] to select the scan resume condi- 7 tion, then push [SET B(D-OFF)]. • See item y at left for scan resume condition details. 8 n Push [CLR A(MW)] to exit set mode. 9 10 11 12 13 14 15 16 17 18 19 78