Icom IC-2820H Instruction Manual - Page 89

6 MEMORY MODE OPERATION ■ Copying memory contents 1 This function copies a memory channel's contents to VFO (or another memory/call channel). This is useful when searching for signals around a memory channel frequency and for recalling the offset frequency, subaudible tone frequency etc. D Memory/call➪VFO qSelect the desired band's (left or right) memory or call channel. ➥ Push the desired band's [M/CALL•MW] several times to select memory mode or call channel, then rotate the same band's [DIAL] to select the desired memory or call channel. wPush and hold [M/CALL•MW] for 2 sec. to copy the selected memory/call channel contents to the VFO. • VFO mode is selected automatically. 2 3 z Push [BAND] to select the desired band as 4 MR/CALL the main band, if necessary. 5 x Select the memory/call channel to be copied. ➥ Push [MR/CALL] to select memory mode, 6 MW then select the desired memory channel 7 via [Y]/[Z] or keypad. Y/Z ➥ Push and hold [MR/CALL] for 1 sec. then push [Y]/[Z] to select the call channel. c Push [FUNC], then push and hold 8 9 [CLR A(MW)] for 1 sec. to copy the selected 10 memory/call channel contents to the VFO. • VFO mode is selected automatically. 11 12 13 [EXAMPLE]: Copying memory channel 30 contents to VFO. Front panel operation: 14 Push M/CALL MW to select memory mode. Rotate M AIN BA ND for selecting memory channel. M/CALL Push and hold MW (same band's) for 1 sec. 15 16 17 HM-133 operation: Push to select memory mode. Select memory channel. 18 Push then push and hold for 1 sec. 19 68