Kyocera TASKalfa 4500i KM-NET Viewer Operation Guide Rev-5.2-2011-3 - Page 72

For an account device, select whether to use Apply same user information as Device Management (available when user information is stored in Communication Settings) or Use another user's information. If Use another user's information is selected, enter the Login user name and Password for the device. For some models, select whether to use local or device authentication. Account Polling Settings Printing devices are interrogated at specific intervals to check for account counter information. When a device is selected from an Accounting Devices View, the following polling mode is provided. Account counter polling Information is gathered about the counters for each account, including total number of prints, copies, FAX, scans, page sizes, duplex pages, and pages per sheet. Select an interval, a day or date, and time of day. Device Polling Settings Printing devices are interrogated at specific intervals to check for error conditions, operational status, and low toner levels. When a device is selected from a Device view, the following polling modes are provided. Status polling Information is gathered about the current operational state of the device, such as error conditions, panel messages, and operating mode. The available range is between 5 and 300 seconds. Counter polling Information is gathered about the values held by various counters in the device, such as number of color pages printed, number of black and white pages, number of faxes received, and so on. The available range is between 1 and 10000 minutes. Toner level polling Information is gathered about the current level of toner in the device. The available range is between 1 and 10000 minutes. KMnet Viewer 5.2 63