Netgear WC7520 WC7520 Reference Manual - Page 109
Maintenance, Remote Management, Apply, To enable and con SNMP
UPC - 606449072969
View all Netgear WC7520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
ProSafe 20-AP Wireless Controller WC7520 Reference Manual To enable and configure SNMP: 1. Select Maintenance > Remote Management > SNMP. The SNMP screen displays. Figure 65. 2. Enable SNMP and configure the settings as explained in Table 31. Table 31. SNMP Settings Setting Description SNMP Select this check box to enable SNMP for the wireless controller. Read-Only Community Name The community string that allows the SNMP manager to read the wireless controller's MIB objects. The default setting is public. Read-Write Community Name The community string that allows the SNMP manager to read and write the wireless controller's MIB objects. The default setting is private. Trap Community Name The community name that is associated with the IP address to receive traps. The default setting is trap. IP Address to Receive Traps The IP address at which the SNMP manager receives traps sent from the wireless controller. Trap Port The port on which the SNMP manager receives traps sent from the wireless controller. The default setting is port 162. SNMP Manager IP The IP address of the SNMP manager. To allow any SNMP manager to access the wireless controller, enter 255.255.255.255. 3. Click Apply. Chapter 9: Maintaining the Controller | 109