Netgear WC7520 WC7520 Reference Manual - Page 59
Managing the DHCP Server, Configuration > System > DHCP, Remove
UPC - 606449072969
View all Netgear WC7520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
ProSafe 20-AP Wireless Controller WC7520 Reference Manual Managing the DHCP Server Note: If you already have a DHCP server on your network, do not enable the DHCP server on the wireless controller. The wireless controller can function as a DHCP server. Multiple DHCP server pools can be added for different VLANs. This screen lets you enable and configure the DHCP server. You can also add DHCP servers. To add a DHCP server and configure its settings: 1. Select Configuration > System > DHCP. The DHCP Settings screen displays. Figure 29. The DHCP Server List shows the DHCP servers that are already configured on the wireless controller. To remove a DHCP server from the DHCP Server List, select its radio button, and then click Remove. 2. Click Add. The Add DHCP Server popup screen displays. Figure 30. DHCP Settings 3. Configure the settings as explained in Table 11, DHCP Settings on page 60. Chapter 5: Configuring Network Settings | 59