Netgear WC7520 WC7520 Reference Manual - Page 55
Configuration > System > General, Apply, To con general settings
UPC - 606449072969
View all Netgear WC7520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
ProSafe 20-AP Wireless Controller WC7520 Reference Manual To configure general settings: 1. Select Configuration > System > General. The General Settings screen displays. Figure 26. 2. Configure the settings as explained in Table 8, General Settings. 3. Click Apply to save your settings. Table 8. General Settings Field Description Name This unique value indicates the wireless controller name. NETGEAR recommends changing the name as soon as possible after setting up. The name must contain only alphabetical characters, numbers, and hyphens, and must be 31 characters or less. Country/Region This setting is crucial for optimal performance of the wireless controller. The wireless controller uses the country code to determine the best wireless settings for your access points. This field displays the region of operation for the wireless controller and the access points managed by the wireless controller. In the United States, the country is preset and cannot be changed on the access points. If the country/region is not set up correctly, the wireless controller might not be able to access the access points Controller Location Code You can use this optional field to enter a code to identify the physical location of the wireless controller. This is especially useful if you use more than one wireless controller. Chapter 5: Configuring Network Settings | 55