Actiontec MI424WR User Guide - Page 65
Physical Address, Privacy, Password, No IP Address, Obtain an IP Address Automatically
View all Actiontec MI424WR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Actiontec Wireless Broadband Router User Manual Physical Address Displays the physical address of the network card used for the network. MTU MTU (Maximum Transmission Unit) specifies the largest packet size permitted for Internet transmission. "Automatic" sets the MTU at 1500. Other choices include "Automatic by DHCP," which sets the MTU according to the DHCP connection, and "Manual," which allows the MTU to be set manually. Coax Link Configure the coax link connection in this section of the screen. Privacy Toggle "Privacy" by clicking in the "Enabled" check box. If Privacy is activated, all devices connected via coaxial cable must use the same password. Actiontec recommends leaving the Privacy option deactivated. Password Enter the Coax Link password here. Internet Protocol This section includes three options: No IP Address, Obtain an IP Address Automatically, and Use the Following IP Address. No IP Address Select this option if the connection has no IP address. This is useful when the connection is operating under a bridge. Obtain an IP Address Automatically Select if the ISP requires the connection to obtain an IP address automatically. The server assigning the IP address also assigns a subnet mask address, which can be overridden by clicking in the "Override Subnet Mask" check box and entering another subnet mask address. Use the Following IP Address Select if the WAN connection is configured using a permanent (static) IP address. The ISP should provide this address, along with a subnet mask address, default gateway address, and, optionally, primary and secondary DNS server addresses. 62