Actiontec MI424WR User Guide - Page 72
Deflate, Obtain DNS Server Address Automatically, Use the Following DNS, Server Addresses, Reject
View all Actiontec MI424WR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 5 Using Network Connections For each compression algorithm (BSD and Deflate), select one of the following from the drop-down list: Reject Selecting this option rejects PPP connections with peers that use the compression algorithm. If Reject is activated, throughput may diminish. Allow Selecting this option allows PPP connections with peers that use the compression algorithm. Require Selecting this option insures a connection with a peer using the compression algorithm. Internet Protocol Select one of the following Internet Protocol options from the "Internet Protocol" drop-down list: Obtain an IP Address Automatically This option is selected by default. Change only if required by the ISP. The server that assigns the Router with an IP address also assigns a subnet mask. Override the dynamically assigned subnet mask by selecting the "Override Subnet Mask" and entering a different subnet mask. Use the Following IP Address Select this option to configure the Router to use a permanent (static) IP address. The ISP should provide this address. DNS Server The Domain Name System (DNS) is the method by which website or domain names are translated into IP addresses. The Router can be configured to automatically obtain a DNS server address, or the address can be entered manually, according to the information provided by the ISP. To configure the connection to automatically obtain a DNS server address, select Obtain DNS Server Address Automatically from the "DNS Server" drop-down list. To manually configure DNS server addresses, select Use the Following DNS Server Addresses from the "DNS Server" drop-down list. Up to two different DNS server addresses can be entered (Primary and Secondary). 69