Asus PCI-DA2100 User Manual - Page 143
Installing NetWare 4.0x/4.1/4.11
View all Asus PCI-DA2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Appendix A 10. Load the driver "DA2000.DSK" once for each installed ASUS PCI-DA2100/-DA2200. This driver supports up to four ASUS PCI-DA2100/-DA2200 controllers. 11. After each instance of the ASUS PCI-DA2100/-DA2200 driver has been loaded successfully, continue with the operations of Novell NetWare server described in NetWare User's Manual. Notes: The correct syntax in STARTUP.NCF file to load the ASUS PCIDA2100/-DA2200 drivers should resemble the following: # load da2000 slot = x x is the slot number of slot into which the ASUS PCI-DA2100/DA2200 has been plugged. The slot number is auto-detected by ASUS PCI-DA2100/-DA2200 driver and shown on the system console screen during ASUS PCI-DA2100/-DA2200 driver loading. 2.2 Installing NetWare 4.0x/4.1/4.11 1. Use the ASUS PCI-DA2100/-DA2200 BIOS Configuration Utility to disable ISA Mailbox Emulation mode(default is disabled). To do this, at system bootup, press [Ctrl-I], select Configure Card option, then change IO Port Address to DISABLED. 2. Use ASUS Text RAID Manager to configure Logical Drives and SCSI Devices and map them to valid SCSI-IDs/LUNs. Note that SCSI ID 7 is reserved for the ASUS PCI-DA2100/-DA2200 adapter and thus no logical drives or devices should be mapped to this SCSI ID. 3. For installation of a new server, follow these procedures: 4. If your NetWare installation package is a CD-ROM version and the CD-ROM Drive used to perform the installation is connected to an ASUS PCI-DA2100/-DA2200 controller, make sure the ASUS PCI-DA2100/-DA2200 ASPI manager "DA2000.SYS", CDROM driver "ASPICDRM.SYS", and Microsoft® CD-ROM extension program "MSCDEX.EXE" are specified in the MSDOS® files CONFIG.SYS and AUTOEXEC.BAT. 5. Plug up to four ASUS PCI-DA2100/-DA2200 controllers into host PCI slots then power on. ASUS PCI-DA2100/-DA2200 BIOS ASUS PCI-DA2100/PCI-DA2200 User's Manual 143