Asus PCI-DA2100 User Manual - Page 153

Appendix A 3. Prepare for the installation by using DISKCOPY (or any other disk-copy utility) to make a backup copy of ASUS PCI-DA2100/DA2200 controller distribution diskette. If you are installing Windows NT 3.1, copy all files from \WINNT\V3_1 to root directory of the backup diskette. If you are installing Windows NT 3.5x, copy all files from \WINNT\V3_5X to root directory of the backup diskette. Use the backup copy as your working diskette. 4. If you are installing Windows NT from a floppy drive, insert the "Windows NT Disk #1" into floppy drive A. If you are installing Windows NT from a CD-ROM drive, insert the "Windows NT Setup Boot Disk" into floppy drive A. 5. Reset your computer. 6. When Prompted, select Custom Setup. If you are installing Windows NT 3.1 go to step 8. 7. Press S to skip mass storage devices detection. 8. Windows NT setup cannot find any adapter and displays NONE. Press S to specify additional SCSI controllers. From the list of SCSI adapters, select "Other (Requires disk provided by a hardware manufacturer)". 9. Insert the ASUS PCI-DA2100/-DA2200 distribution diskette into floppy drive A and press [Enter]. The screen displays "DA-2000 Series PCI-TO-SCSI RAID Miniport". Then, press [Enter] to select this driver. 10. Press [Enter] to continue Windows NT setup and follow the steps given in Windows NT Installation documentation. 3.2 Installing Driver in Existing WinNT 3.1/3.51 System If you are adding an ASUS PCI-DA2100/-DA2200 controller to a computer that already has an ASUS PCI-DA2100/-DA2200 controller installed for Windows NT, then follow step 1 through step 2 only. If you are adding an ASUS PCI-DA2100/-DA2200 controller to a computer that has no ASUS PCI-DA2100/-DA2200 controller installed for Windows NT, then follow all steps. ASUS PCI-DA2100/PCI-DA2200 User's Manual 153