Asus PCI-DA2100 User Manual - Page 173

Appendix A b) Choose "Configure RAID" from the menu and press to enter a proper display mode (either ANSI, VT-100 or ANSI Color). c) In the Main Menu, choose "View and Edit Configuration Parameters", then "Caching Parameters". d) A sub-menu contains "Write Back Cache Enabled/Disabled" which refers to the Write Back mode is Enabled or Disabled. Press on it and choose "Yes" to change it. e) After the cache mode has been changed, resetting the computer is required for the new setting to take effect. After the driver partitioning and operating system are installed, use the same procedure to enable the Write-Back cache - the high performance Write-Back Caching will bring your system into a higher performance level. 2. Connect CD-ROM drive to ASUS PCI-DA2100/-DA2200, remove or disable any other SCSI adapters from the system. (red hat 5.1 installation can only use one SCSI adapter during installation) (The IDE CD-ROM drive can be a substitute for the SCSI CDROM drive). 3. If using ASUS PCI-DA2100/-DA2200 BIOS v1.17B, do not leave Red Hat CD disc in the CD-ROM drive during system reboot. The BIOS 1.17B has CD-ROM boot ability, it detects the CD in the CD-ROM drive, once it detects the CD disc is bootable, the system will boot from CD-ROM not from floppy. 4. Insert "ASUS PCI-DA2100/-DA2200 Red Hat 5.1 Boot Disk" disk 2 into floppy, and power on the system. 5. Insert the Red Hat 5.1 CD disc into the CD-ROM drive after the system boot up, follow the on-screen instruction to start the installation of Linux. ASUS PCI-DA2100/PCI-DA2200 User's Manual 173