Asus PCI-DA2100 User Manual - Page 235

ASUS GUI RAID Manager: Installation controller and to the host computer's SNMP settings before the two can communicate using SCSI commands. (Note: The SNMP settings must be changed prior to installation of the GUI RAID Manager. See SNMP Settings below for a detailed explanation.) The RAID controller settings can be changed using the Front Panel. (Your front panel may be different in appearance from the one shown in this example.) Controller v2.11 Ready ATTEN BUSY ENT ESC POWER From the Main Menu, press t or s to select "View and Edit Configuration Parameters. " View and Edit Config Parms Press ; and then use the t or s to select "Host-side SCSI Parameters." Then press . Host-side SCSI Parameters .. You will need to make adjustments in the following four submenu's: Peripheral Device Type, Peripheral Device Qualifier, Device Support for Removable Media, and LUN Application. Different host operating systems require different adjustments. Look at the table below to find the proper settings for your host operating system. 2.3 In-band SCSI 2-9