Asus PCI-DA2100 User Manual - Page 395
Startup Errors
View all Asus PCI-DA2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
ASUS GUI RAID Manager: Troubleshooting Startup Errors Error Message1: Error encountered during OPEN: Unable to Connect to Controller Cause1: The GUI RAID Manager was not able to establish a link with the target disk array system. This may be caused by one (or more) of the following: a wrong baud rate or communication port setting, no disk array controller is installed, bad RS-232 cable, bad connection, or no null modem is installed. Solution1: Specify the correct baud rate and/or COM port in the Settings of RS-232 Interface dialog box. Ensure that the settings you specify correspond to the actual settings on the RS-232 port. Check also for the required hardware and cable connection. Error Message2: Error encountered during OPEN: Selected Port Not Available Cause2: The COM Port you selected does not exist in your system. Solution2: Specify the correct COM port in the Settings of RS-232 Interface dialog box. Be sure to select the port to which the disk array system is actually connected. Error Message3: Error encountered during OPEN: Selected Port Already in Use Cause3: The selected COM port is in use by another program or device. Solution3: Select an unused COM port from the Settings of RS-232 Interface dialog box and connect the controller to this COM port. Or, locate the program or device that is using the port and disable or remove it. B-2 Startup Errors