Asus PCI-DA2100 User Manual - Page 266
COM Port, Baud Rate, Connecting to a SCSI-to-SCSI controller from a remote, station via telephone
View all Asus PCI-DA2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
ASUS GUI RAID Manager: Basic Operations at Startup From the COM Port# drop-down list box, specify which COM port on the local host is used to connect to the disk array system. To select, click on the down-arrow button at the right of the box, then select the option you need. From the Baud Rate drop-down list box, select the baud rate setting on the RS-232 port of the controller. To select, perform the same procedure described previously. If you wish to modify the baud rate setting on the controller, use the on-board console interface or the GUI RAID Manager. For information on the latter, see Chapter 4, Array Management. 6. Click OK. The enabling of the toolbar buttons signifies a successful connection. 4Connecting to a SCSI-to-SCSI controller from a remote station (via telephone line) 1. From the File menu, select Connect. -or- Click on the Connect/Open command button. The following submenu appears on the screen: 3.2 Connecting and Disconnecting from a Disk Array 3-11