Asus PCI-DA2100 User Manual - Page 162

Appendix A 9. In the Driver tab, click on "Change Driver". When asked to select hardware type, select "SCSI Controllers". 10. Click on the "Have Disk" button and enter a:\win95 as the subdirectory to copy the manufacturer's file from. Insert ASUS PCI-DA2100/-DA2200 distribution diskette into drive A: and click on "OK". 11. Select "ASUS PCI-DA2100/-DA2200 PCI-to-SCSI RAID Adapter", and click on "OK". 12. Click on "OK". The driver is copied. 13. You must restart your system for the changes to take effect. Click on "Yes" to shutdown the system and restart your computer. 14. When the system is booting up, an "Unknown Device" warning window will be displayed, this is a normal behavior because a virtual target is registered by ASUS PCI-DA2100/-DA2200 Miniport Driver to support GUI RAID Manager. Please select "Do not install a driver" , and click on "OK". Don't be alarmed by this message. It is perfectly normal to see this message when using the ASUS PCI-DA2100/-DA2200 under Windows 95/98. 15. Make sure that the ASUS PCI-DA2100/-DA2200 Miniport Driver is working properly by using Device Manager tab of System icon in Control Panel. Click on the plus sign next to the SCSI controllers icon, and double-click on the ASUS PCI-DA2100/DA2200 PCI-to-SCSI RAID Adapter icon. Check the Device status. If the device is working properly, the driver is installed successfully. If not, the driver is not installed. Check your CONFIG.SYS to see if DA2000.SYS is installed. If it is installed, remove it, and restart your computer. 162 ASUS PCI-DA2100/PCI-DA2200 User's Manual