Asus PCI-DA2100 User Manual - Page 381
Controller Type, Host Adapter, Target Controller, Channel Count, Channel x Mode
View all Asus PCI-DA2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 381 highlights
ASUS GUI RAID Manager: Running in Demo Mode 4. In the Controller Type section, select the type of controller you want to use. To use a PCI-to-SCSI controller, select the Host Adapter option button; to use a SCSI-to-SCSI controller, select Target Controller. 5. From the Channel Count drop-down list box, select the total number of channels you want to assign to the selected controller. To select, click on the down-arrow button at the right of the box. Then, select the option you want from the displayed list. Maximum setting for each controller is eight. As you select a value, the program enables the corresponding number of Channel x Mode (where x is the channel number) sections below. 6-4 6.2 Starting the Demo Program
ASUS GUI RAID Manager: Running in Demo Mode
6-4
6.2
Starting the Demo Program
4.
In the
Controller Type
section, select the type of controller
you want to use.
To use a PCI-to-SCSI controller, select the
Host Adapter
option button; to use a SCSI-to-SCSI
controller, select
Target Controller
.
5.
From the
Channel Count
drop-down list box, select the
total number of channels you want to assign to the selected
controller.
To select, click on the down-arrow button at the
right of the box.
Then, select the option you want from the
displayed list.
Maximum setting for each controller is eight.
As
you
select
a
value,
the
program
enables
the
corresponding number of
Channel x Mode
(where
x
is the
channel number) sections below.