Brother International HL-2400C Service Manual - Page 139

Code No. 18-1 LCD Message CLOSE PANEL 18 CLOSE PANEL [*8] [*4] 18-2 SET TR.UNIT 18 CLOSE TR.UNIT [*4] 19 SLEEP MODE 19 SLEEP MODE [*4] 20 SERVICE CALL 20 SERVICE CALL [*9] Description of Message • The engine is in standby. • The Ready LED is lit. [*8]: The open cover is indicated as follows; FRONT: Front Cover TOP: Paper Exit Cover • This message can be cleared by opening & closing the indicated cover. • The engine is stopped. • The Ready LED is lit. • The transfer unit is open. Reconfirm the installation status of the transfer unit. • This message can be cleared by opening and closing the rear access cover. • The engine is idling. • The Ready LED is lit. • This mode is cleared by sending a WAKE-UP command (EC24) from the video controller. • The printer is ready to print after the warming-up process of the engine. • The engine is in standby. • The Ready LED is lit. [*9]: Service Call error code is indicated as follows; For the details of error codes, refer to Chapter VIII "Troubleshooting" in this manual. V-18