Brother International HL-2400C Service Manual - Page 145

36 CLEAR CARE Care Code counters displayed on the LCD can be cleared. Make sure that you clear the relevant CLEAR CARE mode whenever replacing periodical replacement parts with new ones. This mode should only be used to reset the counters after replacement of faulty consumables before their life expectancy is reached. For normal life replacement use the resets available in the Video controller mode Procedure Description of Procedures 1) Press the Continue button after selecting Screen (a) "CLEAR CARE" mode. (a) → (b) 2) Using the Set or w button, move the cursor to select the applicable CARE code and then press the Continue button. (b) → (c) 3) To clear the counter in CLEAR CARE, use the Set or w button to select YES and then press the Continue button. Fuser cleaner (c) (g) OPC belt cartridge (d) Fusing Unit (e) 120K replacement kit (f) 6) Press the Font button to exit the CLEAR CARE mode. (g) → (h) LCD Message SERVICE MODE a) CLEAR CARE 36 CLEAR CARE b) No.= CARED FC ROLL c) YES/NO d) CARED BC UNIT YES/NO CARED FU UNIT e) YES/NO CARED 120K UNIT f) YES/NO 36 CLEAR CARE g) No.= SERVICE MODE h) TEST PRINT V-24