Brother International HL-2400C Service Manual - Page 442

USER'S GUIDE 4-48 To select the font and symbol set in the HP PCL5C mode, follow these steps: 1. Press the Sel button to set the printer off-line. 2. Press the Font button and then press the v or w button to select the primary or secondary font setting menu. . 3. Press the Set button. The display shows the font setting menu. You can skip the font setting menu and advance to the symbol set setting menu with the v or w button.  Note The last lowercase letter "p" or "s" indicates the primary or secondary font setting mode. If you select the secondary font setting mode, the display shows "s" in the following messages. 4. Press the Set button. When you enter the "SELECT FONT" menu, you can select the internal font, optional slot font, or permanent download font. Press the v or w button until the desired font source appears on the display. Display Message INTERNAL FONT CARD1 FONT CARD2 FONT PERMANENT FONT Font Source Internal font of the printer Optional card font in slot 1 Optional card font in slot 2 Permanent download font defined in the HP emulation mode Since these steps instruct you how to select the standard font, select the "INTERNAL FONT" message.  Notes When you select the optional fonts or permanent download fonts, note the following:  If the optional font cartridge/card is not installed, the optional font cannot be selected. No selection appears on the display.  If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, they cannot be selected. No selection appears on the display.  The list you can print out with the Test button helps you to select the optional fonts or permanent download fonts. See "TEST button" in this chapter or "Selecting the Optional Fonts" in Chapter 5.