Brother International HL-2400C Service Manual - Page 177
Cleaning the Transfer Drum, <Tools to Prepare>, <Cleaning Procedure>
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
1.2.7 Cleaning the Transfer Drum The transfer drum should be cleaned according to the periodic maintenance cleaning cycle set out in Table 6-3. Cotton cloth (2 ∼ 3 pieces) 1) Turn off the power supply. 2) Open the rear access cover. 3) Clean the surface of the transfer drum with a dry or damp cotton cloth. Transfer Drum Fig.6-8 CAUTION • Be sure to dry the transfer drum completely after cleaning it with a damp cotton cloth. • Do not clean the transfer drum by using solvent. • Do not touch the transfer drum surface with bare hands, or scratch it. VI-12
VI-12
1.2.7
Cleaning the Transfer Drum
The transfer drum should be cleaned according to the periodic maintenance cleaning
cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2
3 pieces)
<Cleaning Procedure>
1) Turn off the power supply.
2) Open the rear access cover.
3) Clean the surface of the transfer drum with a dry or damp cotton cloth.
Fig.6-8
CAUTION
•
Be sure to dry the transfer drum completely after cleaning it with a damp cotton
cloth.
•
Do not clean the transfer drum by using solvent.
•
Do not touch the transfer drum surface with bare hands, or scratch it.
Transfer Drum