Brother International HL-2400C Service Manual - Page 417
All settings are effective in the HP PCL5C, EPSON FX-850, and IBM
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 417 highlights
CHAPTER 4 CONTROL PANEL Note on "AUTO MASK" When you use application software in non-HP modes, be sure to set "AUTO MASK" to ON. When you use letter- or A4-size paper, the top and bottom 2 lines are masked and they do not appear on the printout. The auto modes are subject to the current emulation mode. O : The auto modes can be set. X : The auto modes cannot be changed and no setting appears. - : The auto modes are not available. AUTO Mode AUTO LF AUTO CR AUTO WRAP AUTO SKIP AUTO MASK Printer Emulation (Factory settings in bold print) HP PCL5C EPSON FX-850 IBM Proprinter XL O OFF O OFF O OFF O OFF X ON O OFF (Note) O OFF X ON X ON O ON - - - O OFF O OFF Note In the IBM emulation mode, FF codes are always followed by a CR code. PAGE FORMAT MODE Notes The settings in this mode menu vary as follows: All settings are effective in the HP PCL5C, EPSON FX-850, and IBM Proprinter XL modes. The X and Y (vertical and horizontal) offsets are effective in the BRScript 2 mode. Other settings are not effective and they do not appear in this mode. The paper size and the X and Y (vertical and horizontal) offsets are effective in the HP-GL mode. Other settings are not effective and they do not appear in this mode. 4-23