Brother International HL-2400C Service Manual - Page 523

CHAPTER 6 TROUBLESHOOTING Q & A This section contains commonly asked questions and the answers concerning your printer. If you have encountered a problem, try to find the question relating to your problem and take the steps recommended to correct the problem. Setting Up the Printer Hardware Question The printer does not come on. The printer does not print. Recommendation Check the following;
The printer is securely plugged into the AC outlet .
The power source is active.
The Power button is on. Check the following:
The printer is turned on.
The printer is Online.
All of the protective parts have been removed.
All the covers on the printer are closed.
The toner cartridges are installed properly.
The 'toner empty' message is not displayed on the LCD. If one or more are on, replace the toner cartridges.
The interface cable is securely connected between the printer and computer.
The Alarm LED is blinking. If the LED is blinking, refer to the Operator Call section of this manual.
The HL-2400C printer is selected in the printer settings in your application.
The host is configured correctly: check printer port, print manager etc. (clear stored job or 'use print manager' is selected off)
There is no jammed paper inside the printer.
Paper is loaded in the Media Cassette.
An Error message is not displayed. 6-13