Brother International HL-2400C Service Manual - Page 67

7 Second Transfer (Paper) The second transfer process is where the toner image on the transfer drum is transferred onto the transported paper. (1) Second Transfer Structure i) The transfer roller for the paper transfer is located as shown in Fig.4-8. ii) The transfer roller is normally kept out of contact with the transfer drum until the second transfer process starts. iii) The transfer roller is positively biased by the power supply THV. iv) The transfer roller is in contact with the transfer drum only in the second transfer process. v) Transported paper passes between the transfer roller and transfer drum. (2) Second Transfer Process (Refer to Fig.4-21.) i) Paper is transported and is synchronized with the transfer drum. ii) The transfer roller operates and is synchronized with the transported paper and is in contact with the transfer drum through the transported paper. iii) The transported paper passes between the transfer roller and transfer drum. At this time the positive high voltage (THV) is fed to the transfer roller. iv) Negatively charged toner on the transfer drum is moved to the positively charged paper. v) The transported paper with the toner transferred to it is moved to the paper discharging process. Paper Discharger Transfer Roller Transfer Drum VAC THV Toner image Paper Fig.4-21 VAC: Power Supply for Paper discharging THV: Power Supply for Transfer Roller Bias IV-18