Brother International HL-2400C Service Manual - Page 217
User Guide.
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
4.2.4 Base Cover (L) 1) Remove the set screws TS4X8 (2 pcs.) from the base cover (L). 2) Remove the base cover (L) from the base. Note: If the optional lower tray unit is fitted, it will be necessary to remove the lower tray clamp screw and locking bar to release the base cover (R). For further information, refer to the User Guide. Fig.7-28 Base Cover (L) PRECAUTION • When re-assembling the base cover, insert the leading edge of the base cover (L) into the hook provided at the bottom (left and right) of the base plate. • Ensure that the projecting part ( ) of the base cover (L) goes into the hole in the base plate bottom. 4.2.5 Upper Cover 1) Open the front cover and release the belt cartridge lock levers. 2) Remove the side cover (R). 3) Remove the set screws BT4X8 (2 pcs.) securing the upper cover. (Top X 1 and Right hand side X 1) 4) Slightly lift up the rear edge of the upper cover. 5) Pull the upper cover toward you and unhook the hook at the front of the cover from the frame. Upper Cover Hook Fig.7-29 VII-19