Brother International HL-2400C Service Manual - Page 427
Card Operation
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 427 highlights
CHAPTER 4 CONTROL PANEL CARD OPERATION Notes BE SURE TO TURN OFF THE PRINTER POWER BUTTON BEFORE INSTALLING OR REMOVING A FLASH MEMORY CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED. The settings in this mode menu are effective only when you have installed a flash memory card or a HDD card in one of the card slots in the printer and you have selected the HP PCL5C, HP-GL, or BRScript 2 mode. They do not appear when the printer has no card or is in any other emulation mode. If you turn the printer off or remove the flash memory card or HDD card while data is being written onto or deleted from the card, all the data on the card may be lost. If the write protect button of the flash memory card or HDD card is on, this mode menu does not appear. An HDD card will only fit into slot 2. Be sure to install a commercial flash memory card or HDD card in the correct card slot of the printer. When you are in this mode menu, you can save macros and fonts in the installed flash memory card or the HDD card. The sub-setting menus displayed in this mode menu vary according to the state of the installed card. Display Message CARD 1 CARD 2 Card Operation Select Card 1. Select Card 2. When two cards are installed, you can select the card that you want to operate. When the installed card is not formatted: When you enter this mode menu with a flash memory card or HDD card installed but not formatted by this printer, you must first format the card. 4-33