Brother International HL-2400C Service Manual - Page 316
It is recommended to ground the nozzle of the vacuum cleaner by using the earth
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
2) Drum cleaner i) Remove the cleaner cover by releasing the two hooks. ii) Holding the handle located on the top of the drum cleaner, push it backwards. iii) Remove the drum cleaner by lifting it out. Drum Cleaner iv) Clean the area where the drum cleaner is mounted with a vacuum cleaner and a cloth. (Refer to the figure as shown on the right.) 3) Inside the printer i) Remove the upper side cover, side cover (L), and upper cover from the printer. ii) Remove the control fan, and then remove the waste toner feeder unit. iii) Vacuum toner around the other side of the waste toner feeder tube and inside the printer. (Refer to the figure as shown on the right.) iv) Reassemble the waste toner feeder unit, control fan, upper cover, side cover (L), and upper side cover. v) Re-install the drum cleaner and cleaner cover. Transfer Drum Handle Waste toner feeder unit CAUTION • Be sure not to damage the surface of the transfer drum with a vacuum cleaner when cleaning the areas around the transfer drum. • Be sure not to contact the nozzle of the vacuum cleaner with the terminals of the interior. Failure to do so will cause damage to the electrical parts in the printer. • It is recommended to ground the nozzle of the vacuum cleaner by using the earth wire. 4) Paper cassette i) Remove the paper cassette from the printer and remove paper from the cassette. ii) Vacuum paper dust in the paper cassette. iii) Reinstall the paper cassette. Paper Cassette A-14