Brother International HL-2400C Service Manual - Page 313

6. RE-PACKING INSTRUCTIONS PRECAUTION When re-packing the printer before shipping, be sure to follow the steps and cautions below. Failure to do so will cause toner or oil spill in the printer and severe damage to the printer. 6.1 Toner Cartridge 1) Open the front cover and remove all the toner cartridges (K, Y, M, C) from the printer. 2) Put the original protective cover (orange) onto each cartridge and put it into the polyethylene bag. Protective Cover 3) Put the toner cartridges into the original starter kit packing. Starter Kit Packing Toner Cartridge CAUTION • If you do not have the original protective cover, cover each toner cartridge with bubble sheet to protect the developer roller. • If you do not have the original starter kit packing, pack each toner cartridge firmly with bubble sheet and put them into the outer carton. 6.2 OPC Belt Cartridge 1) Open the top cover and remove the OPC belt cartridge from the printer. 2) Open the shutter on the OPC belt cartridge and remove toner in the cartridge with a vacuum cleaner. Shutter 3) Cover the OPC belt cartridge with the original protective sheet (black). 4) Put the cartridge into the polyethylene bag. Protective Sheet A-11