Brother International HL-2400C Service Manual - Page 330
OPC belt cartridge again.
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 330 highlights
PR99010 iii) Is the printer inclined because it is installed across two or more tables? Level 1° iv) Is there anything under the printer, or is there something stuck to the printer base? 5) After checking these items, initialize the printer again (opening/closing the top cover automatically initializes the OPC belt cartridge), and measure the gap on the OPC belt cartridge again. If the gap is in the range of 5 ± 2 mm, the printer is installed correctly. (Refer to the figure for Step 3).) A-19
A-19
iii) Is the printer inclined because it is installed across two or more tables?
iv) Is there anything under the printer, or is there something stuck to the printer
base?
5)
After checking these items, initialize the printer again (opening/closing the top
cover automatically initializes the OPC belt cartridge), and measure the gap on the
OPC belt cartridge again.
If the gap is in the range of 5 ± 2 mm, the printer is installed correctly.
(Refer to the
figure for Step 3).)
PR99010
1°
Level