Brother International HL-2400C Service Manual - Page 239
Register Roller
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
4.6.2 Transfer Roller 1) Lift the transfer roller lock lever to release the right hand end of the roller. The angle of lifting the lock lever is approx. 80° from the horizontal. 2) Push the tab of the left hand side to remove the shaft from the installation hole at the right side first, then remove the transfer roller. 3) Remove the transfer roller. Transfer Roller Tab Lock lever Fig.7-69 4.6.3 Register Roller 1) Remove the roller fixing C rings from both ends of the roller. 2) Remove the gear from the shaft (left hand side). 3) Remove the plastic bushes at both ends. 4) Remove the shaft support from the frame while pressing down on the pressure roller to release the pressure from the register roller. 5) Remove the register roller. Gear C ring Plastic bush Register Roller Plastic bush C ring Fig.7-70 VII-41