Brother International HL-2400C Service Manual - Page 627

OPERATION MANUAL Q & A This section contains questions and answers for using the fax function with your printer. Question Recommendation The date or time of the sent The clock of the printer is adjusted when sending the fax / received report is not data. correct. If the printer is turned off and on, the clock of the printer is reset to the default value (01/01/1997 00:00). 'FAX MODE' is not displayed on the control panel. Enter the 'HIDDEN PANEL' menu by pressing the SHIFT and SEL switches. Then, select 'FAX MODEM=ON' in the 'EXT. FAX MODEM' menu. I cannot send any fax data • Check that the correct dial type is set. If not, set the although the data is sent correct dial type in Fax Line Setup of the fax driver. from the computer to the • Check if the outside line access code is set correctly. If printer. not, set it correctly in Outside Line Access Code in FAX Line Setup of the fax driver. • Check if the telephone line is connected correctly. • Check if the External Fax Modem is turned on. • Check if the printer and the External Fax Modem are connected correctly. • Check that you turned on the External Fax Modem before turning on the printer. Fax data is not sent from • Check if the printer port (LPT1 / LPT2 or the network the computer to the printer, printer) is correct. and I cannot send any fax • Check if the printer cable is connected correctly. data. • Check if the network cable is connected correctly to the network card of the printer. I cannot receive fax data. • Check if the telephone line is connected correctly. • Check if 'RECEIVE MODE=ON' is selected on the control panel. Refer to the 'Settings on the Control Panel' section. • Check if the External Fax Modem is turned on. • Check if the printer and the External Fax Modem are connected correctly. • Check that you turned on the External Fax Modem before turning on the printer. www.rtv-h-1o4- rvat-dj.hr