Brother International HL-2400C Service Manual - Page 314
Do not directly touch the OPC belt surface with bare hands or gloves.
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
5) Put the OPC belt cartridge into the original starter kit packing. OPC Belt Cartridge Starter Kit Packing CAUTION • Do not directly touch the OPC belt surface with bare hands or gloves. • If the belt is exposed for more than two minutes to a light source of 800 lux, the belt may be damage. • If you do not have the original starter kit packing, pack the OPC belt cartridge firmly with bubble sheet and put it into the outer carton. 6.3 Fusing Unit 1) Open the rear access cover and slacken the fusing unit securing screws (2 pcs.) 2) Holding the handles at both ends of the fusing unit and remove the fusing unit from the printer. Fusing Unit 3) Remove the oil bottle and the fuser cleaner from the fusing unit and put each of them into the polyethylene bag. Oil Bottle CAUTION Pack the oil bottle in the polyethylene bag and seal it firmly. Failure to do so will cause oil spill during shipping and damage to the printer. 4) Put the oil bottle and the fuser cleaner into the original starter kit packing. Starter Kit Packing Oil Bottle Fuser Cleaner Fuser Cleaner A-12