Brother International HL-2400C Service Manual - Page 249

Display Message T1 MANUAL FEED ***** SIZE 19 CHECK FONT 20 FONT REMOVAL 22 WASTE TONER 23 OIL EMPTY 24 CHANGE FCR 25 NO FUSER UNIT 27 NO OPC BC 28 NO FC ROLLER 72 CHANGE FILTER TONER LOW XXXX FUSER OIL LOW REPLACE FCR REPLACE OPC BC REPLACE FUSER REPLACE 120K KIT REPLACE FILTER Meaning Request to load paper manually. (The message appears alternately to show a particular size.) An error occurred in the optional font card. Countermeasure Load the requested size of paper into the standard media cassette and press the Select button. Turn off the printer, and reinstall or replace the optional font card. Font card removed while the printer is online. Turn off the printer, re-install the font card, and turn on the printer. The Continue button will allow you to temporarily ignore this message. Waste toner pack full of toner Replace with a new one. No oil in the oil bottle Replace with a new one. Change the fuser cleaner. Fusing unit not installed OPC belt cartridge not installed Fuser cleaner not installed Change the ozone filter. The toner of the color indicated by XXXX is nearly empty. Oil in the oil bottle is almost empty. Replace with a new one. Remove fusing unit and then refit it. Confirm correctly installed and clamped. Remove the OPC belt cartridge and then refit it. Confirm correctly installed and locked. Remove fuser cleaner and then refit it. Confirm correctly installed and clamped. Replace with a new one. Replace the toner cartridge which has nearly run out. Replace with a new one. Change the fuser cleaner. Replace with a new one. Change the OPC belt cartridge. Replace with a new one. Change the fusing unit. Change the drum cleaner, paper discharger and transfer roller. Change the ozone filter. Replace with a new one. Replace with new ones. Replace with a new one. VIII-4