Brother International HL-2400C Service Manual - Page 150

43 MARGIN ADJUST The position of the top margin and left margin can be confirmed and adjusted within the range -3.5mm max. and +3.5mm max. Note: It is recommended to use the default value in normal use. Do not perform this mode frequently. Procedure Description of Procedures 1) Press the Continue button after selecting Screen (a) "MARGIN ADJUST". (a) → (b) 2) Using the Set or w button, select either TOP or LEFT and then press the Continue button. (b) → (c) 3) The margins can be adjusted by up to 3.5mm left and right in 0.5mm steps from the reference value "0". Using the Set or w button, select the amount of adjustment by selecting a number displayed in screen (c) or (d). The amount of adjustment selected will be displayed at the upper right corner of Screen (c) or (d). After confirming the desired amount of adjustment is displayed, press the Continue button to set the adjustment. 4) Press the Font button to exit the MARGIN ADJUST mode. (b) → (d) 5) Press the Font button one more time to return to FACTORY MODE. (e) → (f) LCD Message 39 FACTORY MODE a) MARGIN ADJUST 43 MARGIN ADJUST b) TOP/LEFT/LEFT2 43 TOP -2.0mm c) -+ 43 TOP +2.5mm d) -+ 43 MARGIN ADJUST e) TOP/LEFT/LEFT2 39 FACTORY MODE f) DP CHECK V-29